MODEL:

Brief:
This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.
Features:
Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil.
Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving.
Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working.
Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain.
Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It's suitable for packing various products. Mould cost is lower.
Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range.
Adopt PLC +touch screen control system, can indicate the trouble cause, it?s easy to operate and maintain.
Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.
Main Technical Specifications

DPP-140FII Blister Packaging Machine
Main Technical Specifications

MainTechnicalSpecificatis	DPP-140FII
Output	25000-100 000 Capsules or tablets/Hour
Punching Times	20-40PunchesforAlu/PVC,15-25Punches for Alu/alu
Stroke Length	40-120mm
Max.FormingArea&Depth	110X240X12mm(LengthXwidthXdepth)
Packaging Material	PVC: (0.15-0.40)X250mm (thicknessXwidth)
Forming Alu-foil	(0.15-0.20) X250mm(thicknessX width)
PTP Lid Alu-foil	(0.05-0.17)X 250mm (thicknessXwidth)
Air Supply	Clean Compressed Air: 0.6-0.8 Mpa Air onsumption>=0.3 m3/min
Power Supply	380V?10%, 50/60Hz, 3ph 6Kw (optional).
Water Supply	CoolingWaterForMould:RunningWater60L/h,(Watercooler-optional)
Machine Size/N.W.	2800X750X1700mm Net Weight: 1600KG

MODEL:

Brief:
This packaging line combined the blister packing machine and the cartoning machine; it is widely used for packing tablets, Capsules and other similar shape solid articles with alu-plastics blister and put the blister pack into the carton further inPharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Plastic (PVC) Blister forming, automatic material feeding, feeding detecting, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching. Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing And feeding, automatic paper carton spreading, manual leaflet and material are loaded into carton automatically, synchronous (3-row) batch number printing, automatic paper carton sealing, automatic waster eliminating.
Features:
The whole line use advanced digital servo system to realize multi-axis highly precise Synchronous operation. This system has high proof-noise performance and reliability.Adopt man-machine interface, alarm and monitoring system, it can make the system Recover soon from the failure status. Adopt advanced camera detecting and rejecting system to ensure better quality product.
It can realize stepless speed regulation on several motors via switching of control Programs. Adjusting the operating speed of each mechanism via change the speed Ratio to keep the production capacity of each main machines same. On the whole line, the sensor monitoring and detection, overloading protection, failure Diagnosis indication & automatic stop etc. are equipped.
All the mechanical parts are in same step, with flexible coupling, and has strong anti-Impact; it is easy to adjust and maintain, change over the machine parts.The line adopt computer control system, has good user-friendly operating interface. The whole line has setup the separating connection of the clean area and the unclean It?s conforms to GMP requirements.The whole line has the beautiful cover and ensures the production safely.

Main Technical Specifications

Machine Model	TSPL-120F
Output	<=80 Punches (blister packer) 80-120 Cartons/min (cartoner)
Stroke Length	40-120mm
Max Forming Area & Depth	230x240x15mm (Lengthxwidthxdepth)
Finished Products Rate	>=99%
Elimination Rate of Waster	100%
Working Noise	<=80DdB (A)

 

 

Packaging Material PVC	PTP Lid Alu-foil
(0.15-0.40)x250mm(thickness width)	(0.05-0.17) x250mm
(Thickness width)Dialyzing Paper	Roller Diameter/width
(50~100g/m2) x250 mm	?350x250 mm
Paper carton size	Material
(LxWxH)(70-150)x(50--110)x(15-40)mm	250-350 g/m
2Manualleafletsize:( LxW)before folding	After folding
( 100-250) X (100-150) mm (LxW)	( 100-150) X (20-40) mm
Material	50-70 g/m2

 

 

 

Air Supply Clean Compressed Air	Vacuum Degree
0.8-1.0MapAirConsumption>1.0m3/min	-0.09Mpa
Power Supply	380V?10%,50/60Hz,3ph	16Kw (optional).
Water Supply Cooling water for mould	Running Water 100L/h	(Water cooler-optional)
Machine Size/N.W	9000X1600X1950mm
Net Weight:	8500KG

 

 

 

 

HDZ-120F CARTONING MACHINE
Main Technical Specifications

Machine Model	HDZ-120F
Output	60-140 Cartons/min
Finished Products Rate	>=99%
Elimination Rate of Waster	100%
Working Noise	<= 80DdB (A)
PackagingMaterialPaperCarton Size	(LXWXH)(70-130)X (40-100) X (15-50) mm
Manual leaflet size:
(LXW) before folding	( 100-250) X (100-150) mm
(LXW) after folding	(100-150)X(20-40)im
material:	50-70 g/m2
Air Supply Clean Compressed	0.5-0.8 Map
Air Air Consumption	>0.20m3/minVacuum
Degree	-0.09Mpa
Power Supply	380V?10%, 50/60Hz, 3ph 6 Kw (optional).
Machine Size/N.W.	1700X1060X1950mm
Net Weight	3500KG

MODEL: Application:
This machine is a packing machine of new generation in light of the considerationof various shortcomings in which domestic traditional packing machine.It with the functions of ?three preventions and three enhancements?, anti-falsification,moistureproof and dusproof;enhance the product level.
It is applicable for wrapping small and middle sized box such as such as the medicine, health products, foodstuff, daily cosmetics, stationery articles, and audiovisual products,etc. using BOPP film with tear tape.
Features:
1. No need to regulate the height of two work tops of the machine when the mould is replaced, no need to assemble or dismantle the material discharge chains and discharge hopper. Reduce the replacement time of the mould four hours to the present 30 minutes.
2. New-type double safeguard mechanisms are used, hence other spare parts will not be damaged when the machine runs out of step without the stop of the machine.
3. Original unilateral hand swing device to prevent from shaking the machine adversely, and the non-rotation of the handwheel during the running of the machine can secure the security of the operator
4. New-type double-rotary film cutting cutter can ensure no need to mill the blade during many-year use of the machine, which overcomes the defect that the traditional stationary single-rotary film cutting cutter was easily worn.
5. Adjustable to different sizes,Speed Adjuster, temp. adjuster,hopper feeding.Option,photocell sensor for printed film.
Main technical parameters :

Model	CP-2000B
Production capacity	20-80(packs/min)
Package size	(L)40-160mmX(W))20-100mmX(H)10-40mm
Voltage supply	220V 50Hz single phase
	380V 60hz three phase by special order
Electric heating	0.75KW
Power consume	4KW
Overall size	2400X800X1500MM(LXWXH)
N.weight	800KG

MODEL:

The main characteristics of equipment:

 

1. Bag system?Bagging, sealing and filling is relatively independent of the system?The packaging can be adapted to different objects, package size and shape.

2. Product packaging system?Using heat sealing packaging materials (polyethylene, multilayer composite coating), the automatic bagging completed. measures such as packaging filling and sealing process fully automated production facilities. Trilateral closure pocket or bag is a four-sided flat closure. Use different forms of filling machine, and packaging different products.

3. Control System?PLC programmable computer controller VVVF inverter and so on, high integration, the ability to control and reliable operation .Touch screen technology enabled applications to operate machines more reliable and convenient .Photoelectric sensor, encoder, the switches are close to the import of advanced sensors. machinery and electronics integration has been a perfect performance.

 

Technical Parameter:

- Pouch Width 85mm-180mm

- Pouch Length 100mm-225mm

- Max Volume 450ml

- Speed 40-60 pouch/min.

- Accuracy

- Reel 400mm

- Electricity Consumption 2.5KW

- Air Consumption 0.7m3/min

- Weight 700KG

- Size (L?W?H) 3200mm?970mm?2240mm

MODEL:

Purpose:

Suitable for the flat cloth, elasticity cloth, without spinning cloth, PE film, PVC film, and etc. materials cut pastes production packaging

 

Characteristic:

1. PLC computer control system and magnetic powder clutch controls the rising force (PLC is made In Japan, the touch screen, switch power made In Taiwan)
2.Adopts the timing without grade, counting type automatic connection cutting off, and basic cloth stiletto.
3. Produces the cut pastes with different specifications.
4. The crusts of complete machine are made of the stainless steel, silicon rubber rollers as the guide rollers, according with the medical treatment hygienic requirement
5. Produces the miniature stiletto, and water absorption cushion type etc. cut pastes.
6. The external packaging can be coded.

 

Type	HS-W3
Effective width	90mm
Production speed	450?/min
Power of the motor	2.2KW
power of the seeping materials motor	0.75Kw
Total Power	2.95KW
Machine size	2700*800*1800mm
Weight	600Kg

MODEL:

DLB-160F Multifunctional Automatic Soft Alu/Alu Packaging Machine
Brief:
This machine is widely used for packing capsules & tablets for pharmaceutical industries and some similar shape electronic elements etc. solid blocky articles.This alu/alu packing can prevent the packing articles from the sunlight. It has the following function: Automatic material filling, automatic roller- pressing heat sealing, vertical & horizontal Perforation, press the batch number, and automatic cut the waste edge and punching the finished products and transfer out the finished products.
Features:
The speed reducer of friction wheel adopt mechanical stepless speed regulation, machine running is stable.
In the whole layout, working status of each functional part is viewable well, and it is easy and convenient to install, adjust,replace, maintain and operate.
The parallelism of heat sealing roller is adjustable.
Adopt vibrating material feed to screen out scraps and dust enable to guarantee good quality packaging.
PLC+touch screen control system, automatic counting function. Machine will be stop automatically if have some troubles with it and indicate the cause of the troubles via the touch screen.
Fully-closed structure enable to guarantee production safe and compliance with GMP requirements.

DLB-160F Multifunctional Automatic Soft Alu/Alu Packaging Machine
Main Technical Specifications

Machine Model	DLB-160F
Output	50 000-100 000 Capsules or tablets/Hour
Punching Times	16-60 Punches/min
HeatSealing Roller RotarySpeed	<=15R/min
Working Noise	<=80DdB (A)
PackagingMaterialAlu/Plasticcompoundfoil	0.08X160mm (thicknessXwidth)
Air Supply Clean Compressed Air	0.6-0.8 Mpa:
Air Consumption	>=0.20m3/min
Power Supply	80V?10%, 50/60Hz, 3ph 8Kw (optional).
Machine Size/N.W.	2200X850X1650mm
Net Weight	1500KG