MODEL:

Brief:
This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.
Features:
Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil.
Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving.
Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working.
Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain.
Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It's suitable for packing various products. Mould cost is lower.
Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range.
Adopt PLC +touch screen control system, can indicate the trouble cause, it?s easy to operate and maintain.
Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.
Main Technical Specifications

DPP-140FII Blister Packaging Machine
Main Technical Specifications

MainTechnicalSpecificatis	DPP-140FII
Output	25000-100 000 Capsules or tablets/Hour
Punching Times	20-40PunchesforAlu/PVC,15-25Punches for Alu/alu
Stroke Length	40-120mm
Max.FormingArea&Depth	110X240X12mm(LengthXwidthXdepth)
Packaging Material	PVC: (0.15-0.40)X250mm (thicknessXwidth)
Forming Alu-foil	(0.15-0.20) X250mm(thicknessX width)
PTP Lid Alu-foil	(0.05-0.17)X 250mm (thicknessXwidth)
Air Supply	Clean Compressed Air: 0.6-0.8 Mpa Air onsumption>=0.3 m3/min
Power Supply	380V?10%, 50/60Hz, 3ph 6Kw (optional).
Water Supply	CoolingWaterForMould:RunningWater60L/h,(Watercooler-optional)
Machine Size/N.W.	2800X750X1700mm Net Weight: 1600KG

MODEL:

Brief:
This packaging line combined the blister packing machine and the cartoning machine; it is widely used for packing tablets, Capsules and other similar shape solid articles with alu-plastics blister and put the blister pack into the carton further inPharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Plastic (PVC) Blister forming, automatic material feeding, feeding detecting, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching. Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing And feeding, automatic paper carton spreading, manual leaflet and material are loaded into carton automatically, synchronous (3-row) batch number printing, automatic paper carton sealing, automatic waster eliminating.
Features:
The whole line use advanced digital servo system to realize multi-axis highly precise Synchronous operation. This system has high proof-noise performance and reliability.Adopt man-machine interface, alarm and monitoring system, it can make the system Recover soon from the failure status. Adopt advanced camera detecting and rejecting system to ensure better quality product.
It can realize stepless speed regulation on several motors via switching of control Programs. Adjusting the operating speed of each mechanism via change the speed Ratio to keep the production capacity of each main machines same. On the whole line, the sensor monitoring and detection, overloading protection, failure Diagnosis indication & automatic stop etc. are equipped.
All the mechanical parts are in same step, with flexible coupling, and has strong anti-Impact; it is easy to adjust and maintain, change over the machine parts.The line adopt computer control system, has good user-friendly operating interface. The whole line has setup the separating connection of the clean area and the unclean It?s conforms to GMP requirements.The whole line has the beautiful cover and ensures the production safely.

Main Technical Specifications

Machine Model	TSPL-120F
Output	<=80 Punches (blister packer) 80-120 Cartons/min (cartoner)
Stroke Length	40-120mm
Max Forming Area & Depth	230x240x15mm (Lengthxwidthxdepth)
Finished Products Rate	>=99%
Elimination Rate of Waster	100%
Working Noise	<=80DdB (A)

 

 

Packaging Material PVC	PTP Lid Alu-foil
(0.15-0.40)x250mm(thickness width)	(0.05-0.17) x250mm
(Thickness width)Dialyzing Paper	Roller Diameter/width
(50~100g/m2) x250 mm	?350x250 mm
Paper carton size	Material
(LxWxH)(70-150)x(50--110)x(15-40)mm	250-350 g/m
2Manualleafletsize:( LxW)before folding	After folding
( 100-250) X (100-150) mm (LxW)	( 100-150) X (20-40) mm
Material	50-70 g/m2

 

 

 

Air Supply Clean Compressed Air	Vacuum Degree
0.8-1.0MapAirConsumption>1.0m3/min	-0.09Mpa
Power Supply	380V?10%,50/60Hz,3ph	16Kw (optional).
Water Supply Cooling water for mould	Running Water 100L/h	(Water cooler-optional)
Machine Size/N.W	9000X1600X1950mm
Net Weight:	8500KG

 

 

 

 

HDZ-120F CARTONING MACHINE
Main Technical Specifications

Machine Model	HDZ-120F
Output	60-140 Cartons/min
Finished Products Rate	>=99%
Elimination Rate of Waster	100%
Working Noise	<= 80DdB (A)
PackagingMaterialPaperCarton Size	(LXWXH)(70-130)X (40-100) X (15-50) mm
Manual leaflet size:
(LXW) before folding	( 100-250) X (100-150) mm
(LXW) after folding	(100-150)X(20-40)im
material:	50-70 g/m2
Air Supply Clean Compressed	0.5-0.8 Map
Air Air Consumption	>0.20m3/minVacuum
Degree	-0.09Mpa
Power Supply	380V?10%, 50/60Hz, 3ph 6 Kw (optional).
Machine Size/N.W.	1700X1060X1950mm
Net Weight	3500KG

MODEL:

Brief:
This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.
Features:
Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil. Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving.
Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working.
Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain.
Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It?s suitable for packing various products. Mould cost is lower.
Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range.
Adopt PLC +touch screen control system, can indicate the trouble cause, it?s easy to operate and maintain.
Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.

Main Technical Specifications

Machine Model	DPP-250FII
Output	48 000-208 000 Capsules or tablets/Hour
Punching Times	20-40 Punches for Alu/PVC, 15-25 Punches for Alu/alu
Stroke Length	40-120mm
Max.Forming Area & Depth	110X240X12mm (LengthXwidthXdepth)
Packaging Material	PVC: (0.15-0.40)X250mm (thicknessXwidth)
Forming Alu-foil	(0.15-0.20) X 250mm (thickness X width)
PTP Lid Alu-foil	(0.05-0.17)X 250mm (thicknessXwidth)
AirSupplyCleanCompressedAi	0.6-0.8 Mpa Air onsumption>=0.3 m3/min
Power Supply	380V?10%, 50/60Hz, 3ph 6Kw (optional).
Water Supply Cooling wate for mould	Running Water 60L/h, (Water cooler-optional)
Machine Size/N.W	3000X850X1700mm
Net Weight	2100KG

 

MODEL:

TRUSTAR TBF Series Bottle Filling Line is suitable for counting and filling variety tablets and capsules into plastic or glass bottles, it?s widely used in pharmaceutical, nutrition and foodstuff etc. industries. The whole line included the bottle arranging, counting and filling, paper and desiccant inserting, capping, inspecting, induction sealing and labeling functions.

he Most Complete Innovative and Affordable Bottle Packaging Lines in the market Output: Up to 70 bottles/min. on Mid-Speed Bottle Filling Lines Up to 100 bottles/min. on Hi-Speed Bottle Filling Lines Available Pre-Tablet Loading System with Level Sensor No Change Parts Required--All contact parts can be dismantled without tools.
3-Level Vibrating Trays for Feeding 2 Separate Vibratory Sections; 2 Separate Hoppers on TSL-24
Channel Counter Standard Dual Lane Sanitary Conveyor U.S. Banner Sensors & Japan PLC Control and Color Touch
Screen Panel Free Integration, Set-Up, Installation and Training on purchase of our complete bottling line Conformance to cGMP standard

HIGH-SPEED BOTTLING LINE INCLUDES

Hi-Speed Bottle Unscrambler

Capacity	Up to 360 bottles/min
Dimension & Weight	35" x 35" x 51" / 330 pounds
TSL-24 Automatic Counter & Filler
Capacity	Up to 100 bottles/min
Air Consumption	20 liters/min.
Dimension & Weight	110" x 55" x 67" / 890 pounds
TSG-200 Automatic In-Line Capper
Capacity	50-120 bottles/min.
Air Consumption	15 liters/min.
Dimension & Weight:	71" x 35" x 59" / 1300 pounds
TJSG Alu. Foil & Cap Inspecting/Rejecting Unit
Capacity	60-100 bottles/min.
Air Consumption	10 liters/min.
Dimension & Weight	16" x 19" x 51" / 45 pounds
TSZ-2 Automatic Cottoner	TSZ-3 Automatic Desiccant Inserter
Capacity	40-70 bottles/min
Air Consumption	40 liters/min.
Dimension & Weight	47" x 24" x 59" / 260 pounds
2 Units required of each for HI-Speed Bottling Line
TIS-2000 Automatic Induction Sealer
Capacity	80-150 bottles/min
Dimension & Weight	71" x 24" x 55" / 450 pounds
TL-200 Automatic Labeler with Accumulation Tray
Capacity	60-150 bottles/min.
Air Consumption	15 liters/min.
Dimension & Weight	83" x 24" x 51" / 550 pounds

 

MODEL:

Brief:
The HDZ-65F vertical intermittent cartooning machine is designed for low/medium-production packaging lines and is suitable to handle pharmaceutical, chemical, cosmetic and food products. The HDZ-65F compact design allows easy operator access and makes it suitable for installation in space restricted areas. It has following main functions: Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing and feeding; automatic paper carton spreading, manual leaflet and material are loaded into carton automatically, synchronous (3-row) batch number printing, automatic paper cartonsealing, automatic waster eliminating
Features:
Main machine adopts mechanical drive of cam and crank connecting link, and working of each functional part is in harmony, stable and reliable.
Single motor driving, Variable frequency speed regulation, PLC+touch screen control system,automatic counting function, operation is simple,running is stable.
Photoelectric detection and monitoring system to realize overload protection, indication of failure diagnosis, and automatic stop running if there is some trouble.
Machine has (manual and automatic) two status of running , you can choose any one according to your requirement.
Under the specified range, can realizes various specifications carton packaging without change any parts.

Main Technical Specifications

Machine Model	HDZ-65F
Output 40-80	40-80 Cartons/min
Finished Products Rate	<=99%
Elimination Rate of Waster	100%
Working Noise	<= 80DdB (A)
Packaging Material Paper carton size	(LxWxH)(70~125)x(40~78)x(15~30)mm
Material	250~350 g/m2
Manual leaflet size	(LxW)before folding:(100~250)x(100~150mm (LxW)after folding:(100~150)x(20~40)mm
Material	50~70 g/m2
Air Supply Clean Compressed Air	0.5-0.8 Mpa Air Consumption>=.20m3/min
Vacuum Degree	-0.09Mpa
Power Supply	380V±10%, 50/60Hz, 3ph 1Kw (optional).
Machine Size/N.W.	1700x1060x1600mm 800KG

MODEL:

Application:

The machine is a new style adopted the technology of the abroad similar equipment.Not only is this a cost-saving packaging facility suitable for collecting and stacking bulk stuff into box set, such as biscuits, chewing gums and other leisure food products, the products are also more presentable.

 Features:

It is equipped with a frequency converter of multi-functional digital display, plc and touch screen to realize stepless speeding, automatic feeding and counting. By employing a micro air pump, it can achieve pneumatic filming.

Also when package material is printed film ,the  photocell sensor will be provided.      

Main technical Data:

Production capacity	20-40packs/min
Package size:	(40-200x(30-140)x(10-40)mm
Voltage:	220v  50-60hz, single phase
	380v,60hz,three phase for special order
Motor power:	0.75W
Electric heating:	3.7W
Overall size:	3200?850?1600mm
Weight(kg)	1000kg

MODEL:

Packing speed	15-70bags/min
Bag-making size	(L)80-350mm(W)80-250mm
Filling range	150-2000ml
Film width	180-520mm
Packing materials	OPP/CPP PET/PE
Film thickness	0.04-0.08mm
Air consumption	0.36m3/min 0.6MPa
Power supply	AC220V 50Hz 3.5kw
Machine dimensions	(L)1600?(W)1050?(H)1750mm
Machine weight	680kg

MODEL:Application:

This is suitable for automatic packaging particle like sweets, beans, peanuts, seeds, grain, biscuits, nuts, tea, dumplings, gourmet, coffee, sugar.

Feature:

1.Imported PLC control system, simple-operating, visual touch screw.

2.Servo film feeding system, correct register, sealing and cutting positions adopt automatic correction device, high automation.

3.Intelligent temperature controller is used, correct temperature control, ensure nice, smooth seal.

4.Perfect automatic alarming protective function, reduce the consumption up to the lowest.

5.When the machine is combined with metering equipments, full packaging process including automatic feeding, metering, bag filling, date printing and automatic counting is completed.

6.Type of bag making: according to customer's demand, the machine can produce pillow bags, punched hanging bags.

Main Technical data:

MODEL:

MODEL:Application:

Suitable for automatic packaging particular, powder materials like rubber, plastic particular,rice, grain, wheat, seeds, milk powder, medicine. 

Feature:

1.Reasonable design, simple structure.
2.stepping motor, convenient and correct bag length setting.
3.Simple, fast speed regulation.
4.Optional: ribbon coding machine.
5.Big 4-bucket scale, small 4-bucket scale, 2-bucket scale can be
optional.

Main Technical Data:

Packing speed	15-60bags/min
Bag-making size	(L)50-180mm (W)40-100mm
Filling range	5-200ml
Film width	100-220mm
Packing materials	OPP/CPP PET/PE
Film thickness	0.04-0.08mm
Film roll diameter	Max. 300mm
Power supply	AC220V/380V 50Hz 1.5kw
Machine dimensions	(L)800?(W)700?(H)1750mm
Machine weight	300kg

MODEL:

Model	CP-400C-I
Package size	(100-300)x(50-200)x(15-80)MM3
Capacity	12-20packs/min
Voltage	Single phase  220V, 50~60hz
Motor power	0.75kw
Electric heating power	4kw
Overall dimension	2250mm?1100mm?200mm conveyor size:1800mmx500mmx150mm
N.weight	1000kg

MODEL:

Application:

TCH-90A Automatic Cartoning Machine is high technology product incorporates of pneumatic-photo-electro-mechanic. It's used for soft packing material like condoms and tubes or injection or some similar goods into cartons. The working process included 1 or more goods transmitting, leaflets with 1 to 4 folds folding and transport, cartons automatic induction, open and transport, then put blisters/goods with folded leaflet into cartons with automatic embossing, carton tongues sealing or option hot-glue device extra, etc. It can also be linked with Blister Packing Machine, Pillow Machine, Shrink Machine, and Three-Dimensional Packaging Machine to form a production chain.

Feature:

1.International famous brand of electric components such for PLC touch screen, frequency inverters, etc;

2.Transport of automatic system and Manuel system with stopping automatically for overloading;

3.Automatically displaying device for Trouble, speed and finished products counting;

4.Automatic detection and rejection device for lacking of blisters/goods or leaflets;

5.Stable performance with lubricate setting and controlling.

MODEL:

Packaging speed	20-210bags/min(adjustable with a frequency controller)
Packing material	PP, PE, compound film, Aluminum foil compound film, etc
Bag sizes	58 X 55mm (adjustable)
Power supply	220V 50Hz
Motor power	4.5kw
Overall weight	1000kg
machine dimensions	2350x 800 x 1650mm

MODEL:

Packaging speed	30-80 bags/min (adjustable with a frequency controller)
Packing material	PP/PE, compound film, Aluminum foil compound film, paper-plastic etc.
Bag sizes	58X58mm (suitable for both square and round shape)
Power supply	220V 50Hz
Motor power	4Kw
Overall weight	950kg
machine dimensions	3200x1200x1800mm

MODEL:

Application:

This machine is special designed for packing variety condoms. The machinecan finish the feeding, film transportation, stretch of condom, wrapping and molding, thermal sealing, single bag slitting and random bag counting& slitting automatically, automatic oil-dripping, four-side waste material cutting,and also equipped the ink-jet (optional).

Packing Materia	Aluminum foil compound film, pllypropylene/polyethylene compound film
Max. Diameter	280mm (Roller Core Diameter :75-77mm)
Bag Sizes	70mmX30mm, sealing width:4mm
Output	55-80 bags/minute
Power supply	220V 50Hz 2.2kw (optional)
Dimensions	2250 X 1030 X 1220mm

 

MODEL: Application:
This machine is a packing machine of new generation in light of the considerationof various shortcomings in which domestic traditional packing machine.It with the functions of ?three preventions and three enhancements?, anti-falsification,moistureproof and dusproof;enhance the product level.
It is applicable for wrapping small and middle sized box such as such as the medicine, health products, foodstuff, daily cosmetics, stationery articles, and audiovisual products,etc. using BOPP film with tear tape.
Features:
1. No need to regulate the height of two work tops of the machine when the mould is replaced, no need to assemble or dismantle the material discharge chains and discharge hopper. Reduce the replacement time of the mould four hours to the present 30 minutes.
2. New-type double safeguard mechanisms are used, hence other spare parts will not be damaged when the machine runs out of step without the stop of the machine.
3. Original unilateral hand swing device to prevent from shaking the machine adversely, and the non-rotation of the handwheel during the running of the machine can secure the security of the operator
4. New-type double-rotary film cutting cutter can ensure no need to mill the blade during many-year use of the machine, which overcomes the defect that the traditional stationary single-rotary film cutting cutter was easily worn.
5. Adjustable to different sizes,Speed Adjuster, temp. adjuster,hopper feeding.Option,photocell sensor for printed film.
Main technical parameters :

Model	CP-2000B
Production capacity	20-80(packs/min)
Package size	(L)40-160mmX(W))20-100mmX(H)10-40mm
Voltage supply	220V 50Hz single phase
	380V 60hz three phase by special order
Electric heating	0.75KW
Power consume	4KW
Overall size	2400X800X1500MM(LXWXH)
N.weight	800KG

MODEL:

Model	CP-2000A
Production capacity	25-40(packs/min)
Package size	(L)40-200mmX(W)30-140mmX(H)10-50mm
Voltage supply	220V    50Hz single phase
	380V 60hz three phase by special order
Electric heating	0.75Kw
Power consume	4Kw
Overall size	2400mm?850mm?1600mm(LxWxH)
N.weight	880kg

MODEL:

TCP128 Vertical Wet Tissue Packing Machine is widely applied to pack four-side sealing packages, such as wet wipes packing, tissue paper packing, disposable napkin packing, and sterile gauze packing etc.

It incorporates a cross deviation correction device with two degrees of freedom and intelligent longitudinal photoelectric trademark positioning system. It can automatic finish the whole  process including folding, cutting and filling of tissue, bag making, liquid-dripping, printing of produce date, preset counting and finish bags output. The finished bags are four sides sealing.

Production process:   

Raw materials onto the machine-several folding Longitudinally-one or two time Folding crosswisely-cutting-spraying-into  packages-sealing-cutting-transporting

 

Specification:        

Bag size	Length45-145 mm  Width 50-130 mm(double rows)
Packing speed	60-170bags/min
Fold	2-32 layers
Tissue size   (unfolded)	Length80-220 mm  Width 70-200 mm
Wrapping material	PP, PE, compound film, aluminum foil film, paper film, etc.
Power supply	220V  50 Hz  2.6Kw
Liquid adding Range	0-10ml
Overall Dimensions	900*1400*2050 mm
Machine Weight	850 kg

MODEL:

Main application:

This line is composed of QCL120(100,80) vertical washing machine, KSZ620/60(620/43) sterilizing & drying tunnel, AGF12(10A,10,8) filling & sealing machine. It is divided into three zones of washing, drying & sterilizing, filling & sealing. Each machine can function independently, or be connected as a compact line. It could finish processing procedures such as: water sprinkling, ultrasonic washing, ampoules infeed by screw conveyer, Turn ampoules by manipulator, water flushing(interior and exterior), air flushing(interior and exterior), preheating, drying & sterilizing, cooling, (front gas charging), filling, (rear gas charging), preheating, sealing, and etc. it is mainly used for production of ampoule in pharmaceutical factories. The improved type is suitable for not only ampoules but also vials production.

Characteristic:

It adopts ultrasonic washing and washing by alternant jetting water and airflow. It is the most popular and with highest clarity washing equipment in the world. In whole washing process, three washing mediums adopt independent needles, each group of needle only flush one washing medium, avoids cross contamination, which meets GMP requirement much more.

It adopts the principle of laminar flow and hot air sterilizing technics, which can make containers reach 3 Grade National cleanliness(100 Class U.S.A. industrial standard). It is the most popular sterilizing & drying equipment and has best sterilizing effect. It has equal heat distribution and good eliminate pyrogen effect.

It adopts starwheel to input bottles instead of sector block, adopts three segments type walking beam instead of integer type, adopts synchronous gear belt transmission structure instead of cam. It is the most popular filling and sealing device in the world. And it also improves running balance and qualified rate of equipment.

It adopts advanced PLC control man-machine interface operation which can not only control the whole line but also control single machine. It guarantees normal running of the whole compact line, with high automation degree, few operator and low labor intensity.
Main technical parameter:

Type	Suitable sizes	Output	Power	Net weight	Overall dimensions
BXSZ1/20-G	1-20ml ampoule	10000-46000 pcs/h	96.15kw, normal working consumption:51kw	10200kg	11800x2850x2380mm
BXSZ1/20-F2	1-20ml ampoule	10000-33000 pcs/h	96.15kw,normal working consumption:51kw	10200kg	11180x2850x2380mm
BXSZ1/10-F1	1-10ml ampoule	10000-34000 pcs/h	86.15kw,normal working consumption:51kw	9200kg	10600x2620x2380mm
BXSZ1/20-E2	1-20ml ampoule	6000-28000 pcs/h	86.15kw,normal working consumption:51kw	9200kg	10600x2620x2380mm
BXSZ1/20-E1	1-5ml ampoule	10000-28000 pcs/h	63.65kw,normal working consumption:41kw	8600kg	8900x2620x2380mm
BXSZ1/20-D	1-20ml ampoule	6000-23000 pcs/h	63.65kw,normal working consumption:41kw	8200kg	8900x2620x2380mm
BXSZ1/20-C	1-20ml ampoule	4000-12000 pcs/h	63.65kw,normal working consumption:41kw	7200kg	8300x2420x2380mm

MODEL:

We make design of the machine according to the world advanced paper and nonwoven packaging machinery technology, and It is suitable for three-side sealing of wet wipes, alcohol swab, and pad, disinfect cloth, ect.
Features:

1. Triangle vertical pouch forming, photo electricity correction, no blank edge and fault forming
2. Could fold in different types, max 8 folding vertical, and 4 folding horizontal, and fold freely by unfold nonwoven width, length
3. Adopts Japan imported spray pump, make it accurate adding with tolerance of 0.01ml/time.
4. Double times sealing better to ensure the liquid adding volume and avoid leaking.
5 .Double pouch packing in one time makes faster packing, folding and packing in good shape.
6. Automatic process include paper feeding, folding, liquid adding, batch coding, creasing and cutting easy-open, make sure to avoid second pollute.
7. Adopts PLC control system with touch screen panel, could adjust the packing temperature and speed according to the packing material, product's thickness and length.
8. The full machine is covered with Stainless steel in good appearance, also easy to clear and durable.

Main Technical Parameter:

Single bag size	L 80--120MM, W 60--80MM
Nonwoven size(unfold)	L 80--250MM, W 60--200MM
Folded type	Max 8 folding vertical, and 4 folding horizontal
Packaging speed	60-100 bags/min(according to the size and component of wet tissue)
Power supply	220V 50Hz 2.25kw
Liquid adding range	0-200cc
Work pressure	0.15-0.8Kpa
Packing material	PP, PE, compound film, aluminum foil film, paper film, etc.
Weight	1000kgs

Other items:
1. Terms of payment: 30% advance by TT, 70% balance TT before shipment.
2. Delivery date: Within 1 month after receiving advance and the drawing confirmed.
3. Terms of package: By seaworthy wooden case.

MODEL:

The main characteristics of equipment:

 

1. Bag system?Bagging, sealing and filling is relatively independent of the system?The packaging can be adapted to different objects, package size and shape.

2. Product packaging system?Using heat sealing packaging materials (polyethylene, multilayer composite coating), the automatic bagging completed. measures such as packaging filling and sealing process fully automated production facilities. Trilateral closure pocket or bag is a four-sided flat closure. Use different forms of filling machine, and packaging different products.

3. Control System?PLC programmable computer controller VVVF inverter and so on, high integration, the ability to control and reliable operation .Touch screen technology enabled applications to operate machines more reliable and convenient .Photoelectric sensor, encoder, the switches are close to the import of advanced sensors. machinery and electronics integration has been a perfect performance.

 

Technical Parameter:

- Pouch Width 85mm-180mm

- Pouch Length 100mm-225mm

- Max Volume 450ml

- Speed 40-60 pouch/min.

- Accuracy

- Reel 400mm

- Electricity Consumption 2.5KW

- Air Consumption 0.7m3/min

- Weight 700KG

- Size (L?W?H) 3200mm?970mm?2240mm

MODEL:

DYG8 large dosage liquid filler machine is a new product that our company developed and researched. The machine design reasonable, beautiful appearance, running steady, operation and repair easily, cleaning convenience. The perfect combination of aerodynamics and mechanical kinematics, electromechanical intergraded design. The machine is favored deeply by users of hospital pharmacy and cosmetic.

 

Main technical parameter:

.Bottle size: 30-500m1

.Power: 380V 50HZ

.Power: 1 kw

. Filling type: eight needle and stainless steel injunction

.Tolerance of filling quantity: ??2%

.Auto adding stopper ratio: ?99.5%

.Vacuum required:  0.066Mpa

  Vacuum quantity:  20m³/h

.The pressure of compressed air: 0.3-0.4Mpa

.The quantity compressed air consumed: 20m³/h

.Single machine noise: ?70dB

.Weight: 1120kg

.Overall size: 3100x1240x1650mm

 

Characteristic:

.8 heads stainless steel injunction to filling.

.Structure is single, beautiful appearance, cleaning convenience.

.No bottles auto stop, against seep when filling.

.Frequency conversion adjust speed.

.Auto display and count.

.One machine can auto entry, filling adding stopper.

.It completely meets the requirements of GMP.

 

Production capacity:

Bottle size: 50-150m1 4800bottles/hour

         100-250m1 3600bottles/hour

         250-500m1 3000bottles/hour

 

MODEL:

Purpose:

Suitable for the flat cloth, elasticity cloth, without spinning cloth, PE film, PVC film, and etc. materials cut pastes production packaging

 

Characteristic:

1. PLC computer control system and magnetic powder clutch controls the rising force (PLC is made In Japan, the touch screen, switch power made In Taiwan)
2.Adopts the timing without grade, counting type automatic connection cutting off, and basic cloth stiletto.
3. Produces the cut pastes with different specifications.
4. The crusts of complete machine are made of the stainless steel, silicon rubber rollers as the guide rollers, according with the medical treatment hygienic requirement
5. Produces the miniature stiletto, and water absorption cushion type etc. cut pastes.
6. The external packaging can be coded.

 

Type	HS-W3
Effective width	90mm
Production speed	450?/min
Power of the motor	2.2KW
power of the seeping materials motor	0.75Kw
Total Power	2.95KW
Machine size	2700*800*1800mm
Weight	600Kg

MODEL:

TCP128-Y Vertical Wet Tissue Packing Machine is widely applied to pack four-side sealing packages, such as wet wipes packing, tissue paper packing, disposable napkin packing, and sterile gauze packing etc.
It incorporates a cross deviation correction device with two degrees of freedom and intelligent longitudinal photoelectric trademark positioning system. It can automatic finish the whole  process including folding, cutting and filling of tissue, bag making, liquid-dripping, printing of produce date, preset counting and finish bags output. The finished bags are four sides sealing.

Specification

Features:

1. One or several bags/time according to the customers' request and the bag size can be adjustable in a scope according to customer's demand.
2. Turn the gears directory (don't need to stop the machine) to change the packaging speed
3. Adopt the orientation system of intelligent photo electricity cursor, which make the packing high accurate.
4. adding oil automatically by IWEAKI pump during the packing

Samples:

                       

MODEL:

Brief:
This machine is widely used for filling variety liquid into the bottles in pharmaceutical, foodstuff, chemical etc. industries.
Features:
8 nozzles will be filled simultaneously. The quantities of nozzles can be changed according to customer?s requirement. Cleaning and adjusting is easy and quick, the feeding volume cylinder can be adjusted steeples speed, it?s suitable for Filling variety liquid. Each volume cylinder can be micro-adjusted separately after setting the filling volume, has high filling precision and good
Consistency of filling. All the contact material parts adopt 316L stainless steel and silicone rubber; it conforms to the cGMP standard. Filling piston cylinder controlled by stepless speed reducing motor, suitable for filling variety aqueous liquid and viscous liquid. Adopt advanced electro-magnetic clutch and brake, can eliminate the inertia, it has high precision of filling. PLC and touch screen control system, operation and debugging is simple and convenient All the bottle charging, positioning, filling, and bottle discharging are automatically, when the bottle is not on the right position Or blocked, or the filling pipe is not inserted into the bottle during the filling, the machine will stop automatically and continue To running after eliminating the trouble.

Main Technical Specifications

Model	TFL8
Filling Range	90-520ml
Tube Qty.	8 Pieces
Capacity	40-55 Bottles/min
Power Supply	1KW, 3P 380V 50 Hz (optional)
Air Compressor	3-5Kg/cm2
Machine Size	3400X800X1900mm

TSC50 STAR-TRAY TYPE CAPPER
Brief:
This machine is widely used for capping variety bottles in pharmaceutical,
Foodstuff etc industries.
Features:
Intermittent star-tray positioning, machine will stop automatically If there is no bottle or not correct bottle orientation. Caps falling by vibrating from the round disk. Pick up the caps by Robot, bottle orientation is correctly the caps are held by cylinder (The holding force can be regulated), there?s no Damage during capping. The wresting force can be adjusted enable to lock Different caps. There?s cushion device on the head of the Locking cap, it further reduce the shattering rate. The machine has several self-inspection points, it will Stop automatically it there is no bottle to lock, exit blocking Out, bottle orientation not correct, bottle dumpage. Different bottles and caps just change the locking head parts and the star Tray accordingly, the replacing operation is easy.

TSC50 STAR-TRAY TYPE CAPPER
Main Technical Specifications

Model	TSC50
Capping Type	Screw capping
Capacity	40-50 Bottles /min
Power Supply	1.2 Kw 380V 50Hz (Optional)
Air Consumption	4Kg 30L/ min
Machine Weight	700kg

TL 80 AUTOMATIC LABELLER
Brief:
This machine is suitable for labeling the columned And squared plastic or glass bottles in pharmaceutical, Foodstuff etc. industries.

Features:
The machine can finish the following process Automatically: bottle feeding, label belt transfer, Separating the labels synchronization, labeling and Printing the legible batch numbers. The machine is driven by the large torque step motor And equipped with Japan Omron optoelectronic control Device and power source protection system. It has characteristics Of start buffering, high flexibility, large torque at lower velocity, Stable speed, constant working voltage and anti-disturbance to Ensure the labeling operation is precise, stable, reliable and High efficient.

TL 80 AUTOMATIC LABELLER
Main Technical Specifications

Model	TL80
Labeling Range	?20- 100mm
Capacity	80-200 bottles/min (Stamping speed: 80-160)
Label specification	Label width: 20-100mm, Label length: 30-200mm, Label roller core
inside diameter	?76mm, Label roller max. Outside diameter: 300mm
Power supply	800W 220V 50Hz (optional)
Dimension	1820X1100X1500mm
Weight	200Kg

 

MODEL:

DLB-160F Multifunctional Automatic Soft Alu/Alu Packaging Machine
Brief:
This machine is widely used for packing capsules & tablets for pharmaceutical industries and some similar shape electronic elements etc. solid blocky articles.This alu/alu packing can prevent the packing articles from the sunlight. It has the following function: Automatic material filling, automatic roller- pressing heat sealing, vertical & horizontal Perforation, press the batch number, and automatic cut the waste edge and punching the finished products and transfer out the finished products.
Features:
The speed reducer of friction wheel adopt mechanical stepless speed regulation, machine running is stable.
In the whole layout, working status of each functional part is viewable well, and it is easy and convenient to install, adjust,replace, maintain and operate.
The parallelism of heat sealing roller is adjustable.
Adopt vibrating material feed to screen out scraps and dust enable to guarantee good quality packaging.
PLC+touch screen control system, automatic counting function. Machine will be stop automatically if have some troubles with it and indicate the cause of the troubles via the touch screen.
Fully-closed structure enable to guarantee production safe and compliance with GMP requirements.

DLB-160F Multifunctional Automatic Soft Alu/Alu Packaging Machine
Main Technical Specifications

Machine Model	DLB-160F
Output	50 000-100 000 Capsules or tablets/Hour
Punching Times	16-60 Punches/min
HeatSealing Roller RotarySpeed	<=15R/min
Working Noise	<=80DdB (A)
PackagingMaterialAlu/Plasticcompoundfoil	0.08X160mm (thicknessXwidth)
Air Supply Clean Compressed Air	0.6-0.8 Mpa:
Air Consumption	>=0.20m3/min
Power Supply	80V?10%, 50/60Hz, 3ph 8Kw (optional).
Machine Size/N.W.	2200X850X1650mm
Net Weight	1500KG