Brief:
TSMH series vacuum mixer homogenizer is widely used in processing the cream products in cosmetic, pharmaceuticalindustries. It?s specially used for emulsifying the material that viscidity thicker and solid content higher. This machine is designed according to the cosmetic and ointment production advanced technology. It is made up of pretreatment tank, vacuum emulsification mixing tank, vacuum pump, hydraulic system, material discharging system, electric control system and working platform etc.
Features:
1. Steady performance and good homogenizing, easy to operate and clean.
2. Adopt upper coaxial triple blender, lift cover by hydraulic, high speed homogenizing blender (Speed: 0-3500 rpm, frequency speed regulation), lower speed scraper blender (Speed: 10-70 rpm, frequency speed regulation), Homogenizer adopt fast cutting vortex type emulsification blenders which can scrape and blend in a low speed and cling to the tank wall and bottom. Material feeding by vacuum, prevent the powder flying if feeding powder material. The whole working procedure is operated under the vacuum status, prevent the material comes to the bubbles after high speed blending and can meet the requirement of sanitation and asepsis. CIP system has been included, The part contact with the material of the vessel is made from SUS 316L (SUS304) S.S. Inner surface of the vessel adopt mirror polishing. In order to ensure the stabilization of the electric control part, this electric control parts from Siemens, button switch from Japan Fuji, inverter from Panasonic, Vacuum pump from Siemens. Machine design meet GMP requirement!

Main Technical Specifications

Brief:
This Vertical Granulators have a long history in the pharmaceutical industry, they are always first choice when the process needs high granulate density and rapid granulation. In addition, they have low space requirements, are simple to operate and easy to clean.
This Vertical Granulators adopt conical working vessel and "Z" shaped rotor blades and various product-optimized choppers. HMI touch screen and Siemens PLC control system, operation is simple. It can be filled manually by means of containers with lift and transporter devices or pneumatically by means of suction conveyor systems. The finished granule is discharged from the working vessel into a fluid bed machine or a container. It can easily be incorporated into horizontal or vertical product flow. A Rotor Mill is often used downstream in order to achieve a homogeneous granulate spectru
Working Principle:
In the Wet Granulation process, powder is presented in the vertical granulator and subsequently moistened or sprayed with molten material. The shear forces produced by the Z-shaped rotor blades lead to an intensive mixing of the powder and, with the addition of binder solutions, to the rapid formation of high-density granulates. The chopper on the side wall of the container assists the formation of larger agglomerates.

Brief:
THD Series multi-directional motions mixer is a high efficiency mixing equipment,it?s used for high homogenization mixing of powdery and particle materials in pharmaceutical,foodstuff, chemical, light industry, mining industries and so on.
Features:
It has a unique driven shaft servo mechanism, so that the whole machine makes smooth and reliable operation with less vibration and low noise.
Machine no need a foundation and features convenient erection and maintenance as well as long service life.
It can ensure a good mixing effect and the mixing time is short, the homogenization of mixing over 99.5%.
Its loading coefficient reaches 85%, it?s two times more than ordinary rotary mixer.
Machine height is lower, rotating space is small, no need the skip floor.
The discharge end of the mixing barrel adopt the eccentricity cone design ensure the material discharge without dead corner and residue, and easy to clean. It conforms to cGMP standard.
Working Principle:
The mixing barrel is supported by the driving and driven shafts which are crossed in space and also vertical to each other, and are respectively connected by Y type universal joints, so that the mixing barrel makes unique translation, turning, rocking and rolling motions in a solid three dimensional space, thereby speeds up the flow and diffusion of the material being mixed, while avoids the specific gravity segregation of materials due to the action of centrifugal force in an ordinary mixer, and ensures the materials to reach an ideal mixing within a short time.

Main Technical Specifications

Brief:
TVM Series V-shape mixer are widely used in pharmaceutical, chemical, foodstuff etc. industries to mix dried powder and granules. It consists of two V-shape vessel of different or same altitudes, and through mechanical transmission, the materials in the V-shape vessel are made to move back and forth, crossed over and rotate 3600 to achieving ultimate uniform mixing. The machine is rugged in designed and construction,mirror polished of inner and outer shell to meet the cGMP Standard. We offer the most affordable V-shape mixer in themarketplace from laboratory to large scale production batch. We usedheavy duty industrial ABB Motors & Drives for all 3-Phase V-shape andintensifier bar. Available OMRON Safety Sensor Gates for all V-shapemixer.
Features:
No blind angle in the V-shape vessel, no accumulation of materials, high speed I-bar, efficient and short mixing time. The body made of stainless steel and both inner and outer walls are mirror polished. The V-shape vessel have elegant appearance the charging of materials can be made either by manual operation or through pneumatic vacuum system.
For discharging, rotating valves and rapid swivel heads are adopted.
Available Single Arm V-shape mixer (Interchangeable V-shaple vessel on lab models), customize I-bar and also casters on laboratorymodels. We offer both Cross Flow and Twin-Shell Formats of V-shape mixer for different applications.

Main Technical Specifications: