MODEL:

Brief:
This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.
Features:
Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil.
Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving.
Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working.
Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain.
Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It's suitable for packing various products. Mould cost is lower.
Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range.
Adopt PLC +touch screen control system, can indicate the trouble cause, it?s easy to operate and maintain.
Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.
Main Technical Specifications

DPP-140FII Blister Packaging Machine
Main Technical Specifications

MainTechnicalSpecificatis	DPP-140FII
Output	25000-100 000 Capsules or tablets/Hour
Punching Times	20-40PunchesforAlu/PVC,15-25Punches for Alu/alu
Stroke Length	40-120mm
Max.FormingArea&Depth	110X240X12mm(LengthXwidthXdepth)
Packaging Material	PVC: (0.15-0.40)X250mm (thicknessXwidth)
Forming Alu-foil	(0.15-0.20) X250mm(thicknessX width)
PTP Lid Alu-foil	(0.05-0.17)X 250mm (thicknessXwidth)
Air Supply	Clean Compressed Air: 0.6-0.8 Mpa Air onsumption>=0.3 m3/min
Power Supply	380V?10%, 50/60Hz, 3ph 6Kw (optional).
Water Supply	CoolingWaterForMould:RunningWater60L/h,(Watercooler-optional)
Machine Size/N.W.	2800X750X1700mm Net Weight: 1600KG

MODEL:

Brief:
This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.
Features:
Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil. Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving.
Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working.
Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain.
Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It?s suitable for packing various products. Mould cost is lower.
Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range.
Adopt PLC +touch screen control system, can indicate the trouble cause, it?s easy to operate and maintain.
Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts.
The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.

Main Technical Specifications

Machine Model	DPP-250FII
Output	48 000-208 000 Capsules or tablets/Hour
Punching Times	20-40 Punches for Alu/PVC, 15-25 Punches for Alu/alu
Stroke Length	40-120mm
Max.Forming Area & Depth	110X240X12mm (LengthXwidthXdepth)
Packaging Material	PVC: (0.15-0.40)X250mm (thicknessXwidth)
Forming Alu-foil	(0.15-0.20) X 250mm (thickness X width)
PTP Lid Alu-foil	(0.05-0.17)X 250mm (thicknessXwidth)
AirSupplyCleanCompressedAi	0.6-0.8 Mpa Air onsumption>=0.3 m3/min
Power Supply	380V?10%, 50/60Hz, 3ph 6Kw (optional).
Water Supply Cooling wate for mould	Running Water 60L/h, (Water cooler-optional)
Machine Size/N.W	3000X850X1700mm
Net Weight	2100KG

 

MODEL: Application:
This machine is a packing machine of new generation in light of the considerationof various shortcomings in which domestic traditional packing machine.It with the functions of ?three preventions and three enhancements?, anti-falsification,moistureproof and dusproof;enhance the product level.
It is applicable for wrapping small and middle sized box such as such as the medicine, health products, foodstuff, daily cosmetics, stationery articles, and audiovisual products,etc. using BOPP film with tear tape.
Features:
1. No need to regulate the height of two work tops of the machine when the mould is replaced, no need to assemble or dismantle the material discharge chains and discharge hopper. Reduce the replacement time of the mould four hours to the present 30 minutes.
2. New-type double safeguard mechanisms are used, hence other spare parts will not be damaged when the machine runs out of step without the stop of the machine.
3. Original unilateral hand swing device to prevent from shaking the machine adversely, and the non-rotation of the handwheel during the running of the machine can secure the security of the operator
4. New-type double-rotary film cutting cutter can ensure no need to mill the blade during many-year use of the machine, which overcomes the defect that the traditional stationary single-rotary film cutting cutter was easily worn.
5. Adjustable to different sizes,Speed Adjuster, temp. adjuster,hopper feeding.Option,photocell sensor for printed film.
Main technical parameters :

Model	CP-2000B
Production capacity	20-80(packs/min)
Package size	(L)40-160mmX(W))20-100mmX(H)10-40mm
Voltage supply	220V 50Hz single phase
	380V 60hz three phase by special order
Electric heating	0.75KW
Power consume	4KW
Overall size	2400X800X1500MM(LXWXH)
N.weight	800KG

MODEL:

The main characteristics of equipment:

 

1. Bag system?Bagging, sealing and filling is relatively independent of the system?The packaging can be adapted to different objects, package size and shape.

2. Product packaging system?Using heat sealing packaging materials (polyethylene, multilayer composite coating), the automatic bagging completed. measures such as packaging filling and sealing process fully automated production facilities. Trilateral closure pocket or bag is a four-sided flat closure. Use different forms of filling machine, and packaging different products.

3. Control System?PLC programmable computer controller VVVF inverter and so on, high integration, the ability to control and reliable operation .Touch screen technology enabled applications to operate machines more reliable and convenient .Photoelectric sensor, encoder, the switches are close to the import of advanced sensors. machinery and electronics integration has been a perfect performance.

 

Technical Parameter:

- Pouch Width 85mm-180mm

- Pouch Length 100mm-225mm

- Max Volume 450ml

- Speed 40-60 pouch/min.

- Accuracy

- Reel 400mm

- Electricity Consumption 2.5KW

- Air Consumption 0.7m3/min

- Weight 700KG

- Size (L?W?H) 3200mm?970mm?2240mm

MODEL:

Purpose:

Suitable for the flat cloth, elasticity cloth, without spinning cloth, PE film, PVC film, and etc. materials cut pastes production packaging

 

Characteristic:

1. PLC computer control system and magnetic powder clutch controls the rising force (PLC is made In Japan, the touch screen, switch power made In Taiwan)
2.Adopts the timing without grade, counting type automatic connection cutting off, and basic cloth stiletto.
3. Produces the cut pastes with different specifications.
4. The crusts of complete machine are made of the stainless steel, silicon rubber rollers as the guide rollers, according with the medical treatment hygienic requirement
5. Produces the miniature stiletto, and water absorption cushion type etc. cut pastes.
6. The external packaging can be coded.

 

Type	HS-W3
Effective width	90mm
Production speed	450?/min
Power of the motor	2.2KW
power of the seeping materials motor	0.75Kw
Total Power	2.95KW
Machine size	2700*800*1800mm
Weight	600Kg